Jarliet JA-166/C
incl. VAT
The JA-166/C (= 166S) aka Queena is a life-sized female TPE love doll by Jarliet. Her body size is about 166 cm; she weights ca. 32,6 kg (manufacturer specs).
Body measurements: 80 cm × 53 cm × 83 cm (B×W×H) / 63 cm (under bust) / 33 cm (shoulder) / 50 cm (arm length) / 17 cm (hand length) / 110 cm (leg length) / 21 cm (foot length).
Many attributes may be customized; for example, you can select different skin tones, eye colors, and hair colors - just like you are used from Jarliet.
The JA-166/C was introduced in August 2019.
Please choose your desired configuration from the following options.
* If you are not sure which option to choose, we will gladly give advice: View contact form.
* If you choose "doesn't matter", we will decide together with the manufacturer corresponding with availability.
* If you have special requirements that are not available in the listed options, we will check with pleasure what is possible: View contact form.
The following heads are compatible with the Jarliet JA-166/C body style:
 aka Julie Mfr ID: Julie
(Jarliet)
Material: TPE
– Available – |
 aka Winona Mfr ID: Winona
(Jarliet)
Material: TPE
– Available – |
 aka Jolie Mfr ID: Jolie
(Jarliet)
Material: TPE
– Available – |
 aka Susan Mfr ID: Susan
(Jarliet)
Material: TPE
– Available – |
 aka Cora Mfr ID: Cora
(Jarliet)
Material: TPE
– Available – |
 aka Yuina Mfr ID: Yuina
(Jarliet)
Material: TPE
– Available – |
 aka Maia Mfr ID: Maia
(Jarliet)
Material: TPE
– Available – |
 aka Mai Mfr ID: Mai
(Jarliet)
Material: TPE
– Available – |
 aka Misaki Mfr ID: Misaki
(Jarliet)
Material: TPE
– Available – |
 aka Cassie Mfr ID: Cassie
(Jarliet)
Material: TPE
– Available – |
 aka Kimberly Mfr ID: Kimberly
(Jarliet)
Material: TPE
– Available – |
 aka Rina Mfr ID: Rina
(Jarliet)
Material: TPE
– Available – |
 aka Queena Mfr ID: Queena
(Jarliet)
Material: TPE
– Available – |
 aka Meg Mfr ID: Meg
(Jarliet)
Material: TPE
– Available – |
 aka Rebecca Mfr ID: Rebecca
(Jarliet)
Material: TPE
– Available – |
Love doll. The JA-166/C by Jarliet was developed as a love doll and allows vaginal, anal and oral sex - the latter depending on the head used. Though, currently, all compatible heads of Jarliet are capable of oral sex.
The doll is water resistant to a certain degree and can be taken to the bathtub for cleaning. However, the JA-166/C must not be completely submerged as the neck area is not watertight and must be protected against splashing water and moisture.
Dolls with the "standing skeleton" option are not waterproof. They can only take a shower if the feet are adequately protected against water and moisture.
For cleaning 'it is recommended to use a mild hand soap and clear water. Strongly degreasing detergents and shampoos are to be avoided.
After drying, the doll can be powdered. As a powder, as well cornstarch (from the supermarket) as babypowder (from the drugstore) can be used. If you like fragrances, you can add a splash of your favourite perfume to the powder.
Storage. This doll does not have a back hook and can not be stored upright. The manufacturer recommends to store the JA-166/C laying flat on her back. A thick soft foam cushion is suitable as a support. Arms and legs should not lie close to the body.
Please also note our general care instructions for TPE products!
The JA-166/C's scope of supply' includes
* the body and a head according to your choice,
* a pair of eyes (half-rounds) according to your choice,
* a wig according to your choice,
* miscellaneous accessories (according zo the manufacturer's choice),
* if applicable, a vagina insert (when the insert option was ordered).
Some of the following 'factory gifts' might or might not be included in the shipment:
* plush blanket,
* pondoms,
* TPE stain remover,
* TPE adhesive,
* powder,
* plastic comb,
* plastic enema,
* cotton gloves,
* additional wig.
These accessories change according to availability and are to be considered as optional 'factory gifts'. They are not part of the assured scope of supply in the European sense.
Which components are supplied as 'factory gifts' is a decision of the manufacturer, to which we usually have no influence.
Customizing your doll and assembling the desired configuration. With the form above, you can assemble your desired configuration and then add it to the shopping cart. During the checkout, there is also the possibility to leave comments on the order, for example, if you have questions.
Individual production. After payment has cleared, your JA-166/C as well as the corresponding head will be individually manufactured and equipped according to the selected customization options. The lead time to make the doll is typically about 12-14 working days.
Shipping. Upon completion, your JA-166/C will be carefully packed together with the selected head and delivered immediately to the shipping carrier. Shipping to Europe and customs clearance usually take about two weeks. The delivery will take from our EU warehouse to the given delivery address.
If you prefer alternative shipping options, please contact us in advance: View contact form.
For shipment tracking you will receive a tracking code. Within tracking, an estimated delivery date is given.
The following individual customizations are available for this product:
The following blog posts are available about Jarliet JA-166/C:
 Posted 5 years 13 weeks ago
|
 Posted 4 years 50 weeks ago
|
